

Rear panel
| Physical | |
| Size | 1U x 19” Rackmount |
| Dimensions |
44mm x 482mm x 255mm 1.75” x 19” x 10” |
| Weight |
2.25Kg / 5lbs |
| Power Supply |
100-250VAC, 50-60Hz (optional 48VDC Supply) |
| Power Consumption | <25W |
| Environmental | 0°C to +55°C, 95% humidity |
| Interfaces | |
| IP | Ethernet 1 x RJ45, RTP/UDP, SIP/ SDP |
| X.21/V.35 | 15 Way D Type DTE, RS422 levels Rates 64-576 kbit/ |
| ISDN | S or U interface, 4 x RJ45 Rates 64 - 512 kbit/s |
| Aux Data |
9 pin D Type, RS232 level |
| Data Rates (embedded) |
1200, 2400,4800, 9600 Baud |
| Data Rates (via IP) |
1200, 2400, 4800, 9600, 19200, 38400, 76800, 115200 Baud |
| Control |
Front Panel, CMS Software & SNMP |
| Digital Audio I/O |
AES/EBU, Balanced XLR-3, Impedance 110 Ω |
| Digital Ref Input |
XLR-3 |
| Analog Audio I/O | Balanced XLR-3, Input Impedance >10k / 600 Ω Output Impedance <50 / 600 |
| Alarms |
8 Alarms on 25 pin D Type |
| Opto-Couple | 25 way D Type, 8 Inputs driving 8 Relay Outputs |
| Audio |
|
| Digital Operation | 32kHz, 44.1kHz, 48kHz |
| Digital Audio Bandwidth |
10Hz through to 22.5kHz mono & stereo |
| Analog Operation | 8kHz-48kHz |
| Analog Audio Bandwidth | 10Hz through to 22.5kHz mono & stereo |
| Sample Rate Converter |
3:1 |
| Standard Coding |
Linear, Enhanced apt-X 16-Bit & 24-Bit, ISO/MPEG 1/2 Layer III, , G.711, G.722 |
| A/D Converter | 24-bit/96kHz sigma-delta |
| Multi-algorithm Pack 1 | ISO/MPEG 1/2 Layer II |
| Multi-algorithm Pack 2 | ISO/MPEG 1/2 Layer III, ISO/MPEG 2/4 AAC LC, AAC LD, G.711, G.722 |
| Compression Ratio | apt-X: 4:1 others: variable |
| Coding Delay | Standard apt-X 2.5ms @48kHz Fs Enhanced apt-X 1.9ms @48kHz Fs |
| Dynamic Range | 16 Bit > 85dB, 24 Bit > 120dB |
| Phase Response Linear | DC to Fs/2 |
| Pass Band Ripple | < 0.2dB |


